Specifications
- Filter Life: 6 months or 750 gallons (whichever comes first)
- Flow Rate: 0.78 gallons per minute
- Operating Pressure: 33-120 psi
- Operating Temperature: 33-100 °F
- Filter Size: 8" (Length) x 2-1/4" (Diameter)
- Country of Origin: U.S.A.
Contaminant Reduction
The Maytag UKF8001 filter cartridge replacement (previously called PuriClean II UKF8001AXX) is tested and certified by NSF International to meet or exceed NSF/ANSI Standards 42 and 53 for the reduction of:- 99.35% of Lead
- 98.72% of Mercury
- 99.99% of Asbestos
- 99.99% of Cysts
- 95.71% of Benzene
- 99.76% of P-Dichlorobenzene
- 98.74% of Carbofuran
- 76.99% of Atrazine
- 98.72% of Lindane
- 92.97% of Toxaphene
- 97.26% of Chlorine
- 97.09% of Turbidity
- 98.68% of Particulates (Class I)
How to Replace the Maytag UKF8001 (see the video)
- Unlatch the plastic filter cover, and let it swing down (so you can see the filter)
- Turn the used filter counterclockwise 1/4 turn and pull the filter straight down (The water shuts off automatically so you don’t have to worry about flooding your refrigerator)
- Push the filter straight up into the fridge and turn it clockwise 1/4 turn
- Swing the plastic filter cover up until it “snap“ closes
- If your refrigerator has a “Change Filter“ light, reset it
How to Reset the "Change Filter" Light
- Press the dispenser Lock and Auto Light buttons and hold them down for approx. 4 seconds
- Release the butons once the filter status indicator begins to flash
- Press the dispenser Lock and Water buttons and hold them down for approx. 4 seconds
- Release the butons once the filter status indicator begins to flash
Make sure the water and ice from your Maytag or Jenn-Air refrigerator is as clean and fresh tasting as possible by replacing its water filter. This Maytag Puriclean II refrigerator water filter is used in Maytag and Jenn-Air refrigerators with filter access inside the refrigerator.
It's NSF-certified to reduce cysts, particulates (Class I), lead, mercury, and more. (The contaminants or other substances removed or reduced by this water filter are not necessarily in all users' water.) While it effectively removes contaminants from your water and ice, this filter also lowers the taste and odor of chlorine while retaining beneficial fluoride.
For the highest quality water and ice, your refrigerator's water filter needs to be changed over a period of time as its effectiveness at cleaning the water is reduced. For optimal results, you should replace this refrigerator water filter every 12 months to ensure clean, safe drinking water and ice.
Your refrigerator will even remind you when to change its filter, turning on an indicator light found near the water dispenser. Changing the filter is easy--just locate the old filter, twist and turn it until it becomes loose, then pull the old filter out and replace with the new filter.
This model (UKF8001) can be used to replace the following models of water filter:
|
|
From the Manufacturer
This Refrigerator Water Filter is used in Maytag® and Jenn-Air® refrigerators with filter access inside the refrigerator. Simply turn the Refrigerator Water Filter to remove and replace. While retaining beneficial fluoride, this NSF® Certified Refrigerator Water Filter reduces cysts, chlorine's taste and odor, particulates, lead, mercury, and more. Replacing this Refrigerator Water Filter every 6 months ensures clean, safe drinking water.User review this product on Amazon
Find this product on Amazon
No comments:
Post a Comment